containing the control wires is
inserted in the end receptacle to
make the connection. Each end
receptacle should be inspected for
cracks in the insulation, bent or
broken contact pins, and broken
cover springs. Figure 2.16
pictures a typical multipleunit
end receptacle; note the 27 contact
pins.
2.18. SUMMARY
An effective preventive
maintenance program is necessary to
guard against breakdown of
equipment and reduce the expense
involved in replacing parts.
Although checklists and guidelines
may be provided for making
preventive maintenance inspections,
a good inspector does not limit
Figure 2.16. MultipleUnit End
himself to a set list but observes
Receptacle.
his equipment keenly for any sign
of developing defects. A locomotive operator, for example, observes the
instrument panel in the cab containing the various gages and controls. They
include air pressure gages, oil pressure gages in the engine lubricating
system, and water temperature gages. Excessive deviations from normal
readings on the gages may point out deficiencies that could develop into
serious defects.
Section III. Inspection and Maintenance Forms
2.19. GENERAL
Publications governing the inspection and maintenance of Army diesel
electric locomotives require the use of various forms and records. This
section contains only a general discussion of them. For details on
preparation and distribution, the units responsible for inspecting and
maintaining the equipment must have the appropriate publications on hand and
follow the instructions therein. Technical Manual 38750, The Army
Maintenance Management System (TAMMS), and Technical Manual 55202,
Operation and Maintenance of DieselElectric Locomotives, are the two
needed.
27
Previous Page
